Knife Gate Valves

Product Details:

We are offering K Series Knife Gate Valves. Sludges, Slurries, Powders, problems fluids that challenge today’s pulp and paper, chemical, textile, sewage plants, power plats and sugar mills. REGENT meets this challenge by refining the K-Series Knife Gate Valve. A precision-buffed knife plate cuts even the heaviest sludges, sharply and without erosion. One-piece trim provides corrosion-resistant, high-performance shut-off over a long service life. REGENT compact, lightweight Knife Gate Valves have been handling industry’s problem fluids dependable for many years.

Regent Has Refined The Time-Proven Knife Gate Design

• Tough, No-Corrosive Trims The Stainless Steel Inner Body Is Welded To The Cast Iron Gland. The Gland’spoly-Vinyl Chloride Coating Provides Maximum Resistance To Corrosion And Wear.
• The Stainless Steel Knife Plate Is Precious-Buffed For Tight Shut-Off. Its Knife-Like Edge Cuts Off And Shuts Off Even Heavy Or High-Viscous Fluids.
• A Choice Of Three Different Seat Rings In Addition To The Standard Stainless Steel Seat Ring, Rubber And Teflon Seat Rings Are Available As Options. Choose The One Best For Your Fluid Control Requirements.
• Plane Value Seat To Resist Build-Up The Plane Surface Of The Value Seat Has No Recesses To Harbour Heavy Fluid Deposits That Could Build Up And Swamp The Value.
• Leaktight Multilayer Gland Packing The Gland Packing Is Teflon-Impregnated Asbestos Or Vegetable Yarn Layered With Moulded Silicon Rubber. This Chemical-Resistant Packing Provides Total Sealing.
• Bosses For Positive Seating Two Bosses Are Welded To The Value Seat. These Press Knife Plate Snugly Against The Side Of The Seat Ring For Bubble-Tight Shut-Off.
• Smooth Handwheel Opening / Closing The Double-Thread Screw On The Stem Makes Opening / Closing Smooth And Speedy

Prices Details:

• 6200 rs to 2 lakh/piece.

Product Details:

We are offering Pneumatic Stainless Steel Knife Gate Valve.

Prices Details:

• 6200 rs to 2 lakh/piece.

Product Details:

We are offering Cast Iron Knife Gate Valves to our clients.

Prices Details:

• 6200 rs to 2 lakh/piece.

Product Details:

We are offering Pneumatic Knife Edge Gate Valve.

Features:

• Knife gate valves are one of the few application-specific designs among industrial valves. It basically features a design that ensures minimum contact between moving parts of the valves. This is achieved by having a gate that is practically held between layers of gland packing without touching the body parts during most of its travels.
• The seating itself is accomplished with a non-sliding motion aided by jams located in the body. Avoiding sliding contact between gate and body permits this valve to handle abrasive particles present in the media much better than conventional designs.
• Another feature is the beveled bottom edge of the gate (from which it derives the ‘knife’ in its name) which allows positive closure of the gate even when solid particles settle at the bottom of the body.
• In handling abrasive media, deflection cones are generally used in order to avoid direct impingement of the media on the seat surface; hard facing of seat part is also sometimes used which involves swelling of the seat or gate or complete intruding of body and gate.
• Another feature is the purge connection which let in suitable fluids at pressures higher than line pressure to clean seating surfaces (body purges) and packing area (chest purges). This minimises abrasive wear and tear during opening and closure of the valve.
• Knife gate valves are excellent hopper isolation valves with their ability to cut through flowing powders and close by dislodging any material in the seating area. This is also perhaps the only valve design which can tolerate differential thermal expansion of its parts without affecting its functions, thus making an ideal choice for handling high-temperature media

Prices Details:

• 14500 rs to 2.65 lakh/piece.

Product Details:

We are offering Manual Operated Knife Gate Valves.

Regent has refined the time-proven knife gate design:

• Tough, No-corrosive trims The stainless steel inner body is welded to the cast iron gland. The gland’s poly-vinyl chloride coating provides maximum resistance to corrosion and wear.
• The stainless steel knife plate is precious-buffed for tight shut-off. Its knife-like edge cuts off and shuts off even heavy or high-viscous fluids.
• A choice of three different seat rings In addition to the standard stainless steel seat ring, rubber and Teflon seat rings are available as options. Choose the one best for your fluid control requirements.
• Plane value seat to resist build-up The plane surface of the valve seat has no recesses to harbor heavy fluid deposits that could build up and swamp the value.
• Leak tight multilayer gland packing The gland packing is Teflon-impregnated asbestos or vegetable yarn layered with molded silicon rubber. This chemical-resistant packing provides total sealing.
• Bosses for positive seating Two bosses are welded to the valve seat. These press knife plate snugly against the side of the seat ring for bubble-tight shut-off.
• Smooth handwheel opening/closing The double-thread screw on the stem makes opening/closing smooth and speedy.

Prices Details:

• 6200 rs to 2 lakh/piece.

Additional Information:

• Item Code: MHW

Product Details:

We are offering a wide range of Industrial Knife Gate Valves.

Prices Details:

• 6200 rs to 2 lakh/piece.

Product Details:

We are offering a wide range of V-Notch Type Knife Edge Gate Valve.

Prices Details:

• 6200 rs to 2 lakh/piece.

Product Details:

We are offering Pneumatic Cylinder Knife Edge Gate Valve.

Prices Details:

• 6200 rs to 2 lakh/piece.

Product Details:

We are offering a wide range of Wafer Type CS Knife Edge Gate Valve.

Prices Details:

• 6200 rs to 2 lakh/piece.

Product Details:

We are offering Sandwich Type Knife Edge Gate Valve.

Usages:

• Pulp & Paper Industries
• Thermal Power Plants
• Sugar and Textiles Mills
• Industries Sewage Plants

Prices Details:

• 6200 rs to 2 lakh/piece.

Product Details:

We are offering a wide range of M Series Knife Gate Valve. Regent has developed a range of special design knife gate valves with the help of its dedicated and technical professional team. Regent knife gate valves M-series is a step forward in the direction which enhances customer’s profitability and satisfaction due to reduced costs.

Application and Usages:

• Pulp and Paper Stock
• Slurry Lines
• Sludge and viscous media handling
• Dry Solid and Powder Handling
• High-Temperature Gas Line

• Knife Gate Valves Is One Of The Few Application-Specific Designs Among Industrial Valves. It Basically Features A Design That Ensures Minimum Contact Between Moving Parts Of The Valves. This Is Achieved By Having A Gate That Is Practically Held Between Layers Of Gland Packing Without Touching The Body Parts During Most Of Its Travels.
• The Seating Itself Is Accomplished With A Non-Sliding Motion Aided By Jams Located In The Body. Avoiding Sliding Contact Between Gate And Body Permits This Valve To Handle Abrasive Particles Present In The Media Much Better Than Conventional Designs.
• Another Feature Is The Bevelled Bottom Edge Of The Gate (From Which It Derives The ‘Knife’ In Its Name) Which Allows Positive Closure Of The Gate Even When Solid Particles Settles At The Bottom Of The Body.
• In Handling Abrasive Media, Deflection Cones Are Generally Used In Order To Avoid Direct Impingement Of
  The Media On The Seat Surface; Hard Facing Of Seat Part Is Also Sometimes Used Which Involves Stelliting Of The Seat Or Gate Or Complete Intruding Of Body And Gate.
• Another Feature Is The Purge Connection Which Let In Suitable Fluids At Pressures Higher Than Line Pressure
  To Clean Seating Surfaces (Body Purges) And Packing Area (Chest Purges). This Minimises Abrasive Wear And Tear
  During Opening And Closure Of Valve.

Knife Gate Valves Are Excellent Hopper Isolation Valves With Their Ability To Cut Through Flowing Powders And Close By Dislodging Any Material In The Seating Area. This Is Also Perhaps The Only Valve Design Which Can Tolerate Differential Thermal Expansion Of Its Parts Without Affecting Its Functions, Thus Making An Ideal Choice For Handling High Temperature Media.

Prices Details:

• 6200 rs to 2 lakh/piece.

Product Details:

Prices Details:

• 6200 rs to 2 lakh/piece. 

Product Details:

Prices Details:

• 6200 rs to 2 lakh/piece.

Product Details:

Prices Details:

• 6200 rs to 2 lakh/piece.

Product Details: